CPD16-3智能冷鏈叉車-佳力防爆車輛制造（山東）有限公司

型號 Model		單位Unit		CPD10-3	CPD16-3
額定起重量 Rated lifting capacity		kg	—	1000	1600
長度 Length		mm	L	3087
寬度 Width			W	1200
高度 Height	不起升門架高度 Mast without lifting		B	2120
	護頂架高度 Heihgt at overhead guard		H	2160
最大起升高度 Max.lifting height			C	3000（接受門架高度特殊訂貨）
貨叉長度 Fork length			G	920
最小離地間隙 Min. Underclearance			—	75
最小轉彎半徑 Min.outside turning radias			R	1700
載荷中心距 Load centre			—	500
前懸距 Fork Overhang			K	435
軸距 Wheel Base			J	1255
輪距 Tread	前 Front wheels		N	996
	后 Rear wheels		M	0
門架傾角（前/后） Tilt angle forward/backward		°	D-E	2/4
滿載最大起升速度 Max.lifting speed(laden)		mm/s	—	250
滿載最大行駛速度 Max.travel speed(laden)		km/h	—	11
蓄電池 Battery	電壓 Voltage Rated	V	—	80
	容量 Capacity	Ah	—	300
電機額定功率 Motors Rated Output	行走 walking	kw	—	7.5
	起升 lifting		—	6.5
	防護等級 Protection grade	—	—	IP65
輪胎 Size	前輪 Size front	—	—	6.50-10
	后輪 Size rear	—	—	18×7-8
滿載爬坡度 Max.Gradeablity		％	—	15
自重 Service Weight		kg	—	3550	3650

采用先進的交流控制系統，優異的啟動爬坡性能，防止坡道溜車功能。
采用智能溫控系統，保障液壓油、蓄電池等工作在合適溫度范圍，延長低溫環境下叉車的使用時間，并提高使用壽命，降低了液壓油的使用成本。溫控式加熱座椅可提高操作者冷寒環境下的舒適性。
采用智能過載保護系統，稱重式貨叉，自動記錄貨物重量、并累加總重、超載時報警，確保人身和貨物的安全。
先進的智能集成儀表系統；實時顯示相關介質溫度，記錄裝載工作量，并具有故障報警及診斷功能。
使用先進的特殊涂裝工藝，保障車體不受腐蝕，采用不銹鋼防護叉裝區避免摩擦受損，延長工作區壽命并提高叉裝區的安全衛生，防止食品污染。
采用無痕輪胎，防止食品污染
獨特的車體結構設計，減少因不同溫度環境變化，形成冷凝水在車體上的積蓄。
整機結構緊湊，采用三支點機構，前輪制動后輪轉向，轉向靈活，轉彎半徑小。
人機工程設計，操作舒適，外形美觀。
適用于-55℃以上的低溫環境下的連續作業，如冰庫、冷庫等冷鏈生鮮、醫藥行業的搬運裝卸作業。

Characteristics

Adopting advanced AC control system, excellent performance of starting and climbing, having anti-ramp sliding function.
Adopting smart temperature control system to keep hydraulic oil、battery etc. in suitable temperature range, increase working time in low temperature environment, extend service life and decrease use-cost of hydraulic oil. Heatable seat can improve comfort for operator in cold environment.
Adopting smart overload protection system, gravimetric fork, automatically record goods weight、accumulating totals、warning by overload and ensuring safety.
Advanced smart integrated instrument system; displaying real-time related medium temperature, recording load data and having failure alarm and diagnose function.
Using advanced special coating technology to protect truck body anti corrosion. Using covered with stainless steel fork to avoid wear, extend the fork service life and improve fork safety and sanitation to avoid food contamination.
Adopting traceless wheel to protect food from contamination.
Adopting mechanism of three support points, front wheel for brake and rear wheel for turning, flexible turning and small turning radius.
Special vehicle body design, reducing by environment temperature changing produced condensed water collect on vehicle body
Ergonomics design, comfort operation, beautiful appearance.
It can be applied into environment with above-55℃, such as ice house、 cold storage etc. cold chain fresh industry.

叉車參數